Barricades  /  Type III Barricades

• Type 3 Barricade with 3 - 4' striped boards and Angle Iron uprights & feet.
• Choose reflective sheeting.

• Type 3 Barricade with 3 - 6' striped boards and Angle Iron uprights & feet.
• Choose reflective sheeting.

• Type 3 Barricade with 3 - 8' striped boards and Angle Iron uprights & feet.
• Choose reflective sheeting.

• Choose reflective sheeting.

• Type 3 Steel Barricade Kit with 3 - 4' striped boards and Square Steel uprights & feet.
• Choose reflective sheeting.

• Type 3 Steel Barricade Kit with 3 - 6' striped boards and Square Steel uprights & feet.
• Choose reflective sheeting. Uses galvanized steel for superior corrosion resistance.

• Type 3 Steel Barricade with 3 - 8' striped plastic boards and Square Steel uprights & feet.
• Choose reflective sheeting (Engineer Grade, High Intensity Prismatic or Diamond Grade).

• Type 3 Barricade Kit with galvanized steel for superior corrosion protection.
• With 3 - 10' striped boards and Square Steel uprights & feet.
• Choose which reflective sheeting you need.

• Type III Barricade with 3 - 4' striped boards and Square Steel uprights & Angle Iron feet.
• Choose reflective sheeting.

• Type III Barricade with 3 - 6' striped boards and Square Steel uprights & Angle Iron feet.
• Choose reflective sheeting.

• Type III Barricade with 3 - 8' striped boards and Square Steel uprights & Angle Iron feet.
• Choose reflective sheeting.

Type III Steel Barricade Kit with 3 - 10' striped boards and Square Steel uprights & Angle Iron feet. Choose reflective sheeting.

• Type III Barricade with 3 - 6' striped boards, 63" Power Post Uprights and Square Steel Feet.
• Choose reflective sheeting you need.

• Type III Barricade with 3 - 8' striped boards, 63" Power Post Uprights and Square Steel Feet.
• Choose reflective sheeting.

• Type 3 Barricade with 3 - 10 inch striped boards, 63" Power Post Uprights and Square Steel Feet.
• Choose reflective sheeting.

• Volcano Base with Power Post™ Type III Barricade
• Plastic 1" x 8" boards are available in 6' lengths
• Volcano rubber base weighs 43.25 lbs. 30.25”L x 14”W recycled rubber 4.63”H steel base plate  
• Boards may be sheeted (on one or both sides)
• Accepts two flashing lights
• NCHRP-350/MASH Accepted, Meets MUTCD Standards

• Volcano Base with Power Post™ Type III Barricade
• Plastic 1" x 8" boards are available in 8' lengths
• Volcano rubber base weighs 43.25 lbs. 30.25”L x 14”W recycled rubber 4.63”H steel base plate  
• Boards may be sheeted (on one or both sides)
• Accepts two flashing lights
• NCHRP-350/MASH Accepted, Meets MUTCD Standards

Volcano Rubber Base

Recycled Rubber and Steel Base for Posts

• Holds posts up to 1.75" x 1.75"
• Weighs 43.25 lbs.
• 2 carrying handles
• Stacks for transportation and storage.
• Typically used with Type III application as a base.
• 14"W x 30.25"L x 1.875"H

• Use with any Steel Leg Barricades or replacement boards for Combocades.
• Prices starting at $7 each.
• Complies with MUTCD requirements.
• Choose 4', 6', 8" length.  Longer boards available upon request.
• Exact width of board is 5/8".

• Low as $160 each!
• Call for Volume Pricing!
• Choose one or two sided reflective sheeting.

Choose engineer grade or high intensity prismatic striped sheeting. Boards can be sheeted on one side or both sides. When sheeted on one side, produced with right sheeting unless requested otherwise

All plastic and collapsible. Easier to transport, install, store than wood or steel Type III barricades

Dimensions: Upright - 3.5" x 3.5" x 5' - Base -1.5" x 5.5" x 5'

NCHRP 350 Certified and Meets MUTCD Standards. Made in the USA.

• Low as $203.50 each!
• Call for Volume Pricing!

As low as $87.50!