| PAB-SP
|
|
|
|
| SB72
|
|
|
|
| PAP-PSP-1
|
|
|
|
| PAH-SP
|
|
|
|
| SH
|
|
 |
| Rubber Speed Hump - 2.25"H |
- Ideally used near schools or where there's pedestrian traffic.
- Made from 100% Recycled rubber.
- Easy, one person installation (instructions included).
- Removable for surface maintenance, snow plows or to relocate at a new site.
- Virgin rubber overlay with molded-in yellow road marking tape stripes.
- Middle piece 35"W x 24"L x 2.25"H, End piece 35"W x 17.5"L x 2.25H
|
| Special Pricing Available |
|
|
| VR-206-6
|
|
|
| Expandable, Extra Long Rubber Speed Bump - 5-10 MPH - 2"H |
- Expandable speed bumps can be placed in strategic locations on the street to reduce vehicle speeds 0-15 mph.
- This option is ideal for narrow driveways or private communities, where vehicle speeds are expected to be lower.
- Dimensions: Middle Piece 40"L x 15"W x 2"H, End Cap 10"L x 15"W x 2"H
|
|
|
| 179
|
|
|
|
| XASPHALT
|
|
|
|
| XCONCRETE
|
|
|
|
| FS-1
|
|
|
|
| FS-3
|
|
|
|
| UHB3035
|
|
|
| 3.5" Single Tunnel System |
- 3.5" Single Tunnel System. Hose Bridge for up to 3.5" lines.
- See additonal image for specifications.
- 40 lbs.
- Priced as each.
|
|
|
| UHB2025
|
|
|
| 3" Single Tunnel System |
- 3" Single Tunnel System. Hose Bridge for up to 3" lines.
- See additonal image for specifications.
- 32 lbs.
- Priced as Each
|
|
|
| UHB4045
|
|
|
| 4.5" Single Tunnel System |
- 4.5" Single Tunnel System. Hose Bridge for up to 4.5" lines.
- See additonal image for specifications.
- 50 lbs.
- Priced as Each
|
|
|
| UHB5060
|
|
|
| 6" Single Tunnel System |
- 6" Single Tunnel System. Hose Bridge for up to 6" lines.
- See additonal image for specifications.
- 92 lbs.
- Priced as Each
|
|
|
| 1791Y
|
|
|
| Airplane Service Ramp - Yellow |
| This aircraft ramp features a lightweight (28 lbs.) ergonomic design with a raised textured surface, beveled entry and exit edges, high-visibility yellow HDPE, full-length handling and a 1,000 lb. load capacity. 100% designed and made in the USA. Packing Dimensions 61"L x 23" W x 8" H. |
| Special Pricing Available |
|
|
| 1797
|
|
|
| Portable Poly Dock Plate for Hand Trucks - 48" Wide |
- Includes a raised surface for excellent traction in all weather conditions.
- Beveled entry and exit edges.
- Aluminum legs for durability and strength.
- Two integrated handles for easy handling
- 750 lbs. max load and 4" height differential.
|
|
|
| W16-7
|
|
|
|
| G-52R9
|
|
|
|
| W17
|
|
|
|
| SBD-72
|
|
|
| Deluxe Recycled Plastic Speed Bump w/Concrete Hardware |
| Deluxe Recycled Plastic Speed Bump w/Concrete Hardware. Help control drivers in dangerous areas while protecting people and property. One person installation. Holds up under truck and semi-trailer traffic. Can be removed for seal coating, snow removal, or change of location. Resists marring by oil, road salt, sunlight and chemicals. Unlike lumber, it does not leach out polluting chemicals. Resists rotting, termite damage and corrosion. No costly painting or maintenance. The concrete hardware kit includes bolts, anchors and washers. Measures 72" x 12" x 2-1/4" and weighs 40lbs. Number of mounting holes =4. Features dual 1" x 3/4" cable channels. |
|
|
| SBDA-72
|
|
|
| Deluxe Recycled Plastic Speed Bump w/Asphalt Hardware |
| Deluxe Recycled Plastic Speed Bump w/Asphalt Hardware. Help control drivers in dangerous areas while protecting people and property. One person installation. Holds up under truck and semi-trailer traffic. Can be removed for seal coating, snow removal, or change of location. Resists marring by oil, road salt, sunlight and chemicals. Unlike lumber, it does not leach out polluting chemicals. Resists rotting, termite damage and corrosion. No costly painting or maintenance. Asphalt kit includes spikes and butyl tape. Measures 72" x 12" x 2-1/4" and weighs 43lbs. Number of mounting holes = 4. Features dual 1" x 3/4" cable channels. |
| Special Pricing Available |
|
|
| VR-206-7
|
|
|
| Expandable Rubber Speed Bump 5-10 MPH - 2"H |
- A Speed Bump is a raised device, which is placed across a roadway to reduce vehicle speeds 0-15 mph.
- This option is ideal for narrow driveways or private communities, where vehicle speeds are expected to be lower.
- Dimensions: Middle Piece 39"L x 14"W x 2"H, End Cap 10"L x 14"W x 2"H
|
|
|
| VR-206-8
|
|
|
| Rubber Speed Bump 6' - 5-10 MPH - 2"H |
- A Speed Bump is a raised device, which is placed across a roadway to reduce vehicle speeds 0-15 mph.
- This option is ideal for narrow driveways or private communities, where vehicle speeds are expected to be lower.
- Dimensions: Middle Piece 72"L x 12"W x 2"H, End Cap 8"L x 12"W x 2"H
|
|
|
.jpg "Speed Bump Ahead Sign 24")
.jpg "Caution Speed Bump 18")
