Premium Textured Rubber Speed Hump
This Premium Textured Speed Hump is used to slow down traffic in a gentle manner. Designed to reduce noise and discomfort for the driver, when compared to rubber speed bumps and asphalt or concrete speed humps. Suitable for use in parking lots, roadways, and private lanes. Sold in modular sections, so you can configure to fit any space.
Features:
- Use for speeds 15 mph or less in heavy traffic areas.
- Quieter and more comfortable to drive over (compared to speed bumps).
- Textured, non-slip surface improves traction.
- Durable vulcanized rubber won't chip, crack or crumble.
- Embedded yellow rubber striping for visibility.
- Yellow is made from long lasting EPDM rubber and will not fade or crack in any weather condition.
- Join multiple middle sections together to create length needed; finish with end caps.
- Longer lasting and more cost efficient than concrete or asphalt alternatives.
- Easily installed, removed, relocated, and stored without damage.
- Installs on asphalt or concrete; flexible rubber conforms to surface contours.
Installation:
Hardware sold separately. See installation instructions below.
Asphalt Installation:
- Each middle section requires six 14" x 1/2" rebar spikes and 5/8" washers. Use 6 per each part XASPHALT per section (sold separately).
- Each end cap section requires five 14" x 1/2" rebar spikes and 5/8" washers. Use 5 per each part XASPHALT per section (sold separately).
Concrete Installation:
- Each middle section requires six 4-1/2" lag bolts, 2" lag shields, and 1/2" washers. Use 6 per each part XCONCRETE per section (sold separately).
- Each end cap section requires five 4-1/2" lag bolts, 2" lag shields, and 1/2" washers. Use 5 per each part XCONCRETE XCONCRETE per section (sold separately).
Adhesive Installation:
- Caution: if you wish to install using an adhesive, contact the manufacturer of the floor sealant (to which you wish to apply the adhesive) for review of compatibility.
Options:
- Textured speed hump sold in sections.
- End caps sold separately.
Caution:
- Not designed for speeds over 15 mph.
- Sweepers must raise brushes before driving over speed humps.
- Remove speed humps for road maintenance or snow plowing.
Specifications:
| Middle section dimensions | 19" L x 35" W x 2" H |
| Middle section weight | 38 lbs. |
| End cap dimensions | 10" L x 35" W x 2" H |
| End cap weight | 14 lbs. |
| Material | vulcanized SBR rubber (60% recycled) and yellow EPDM rubber |
| Stripes | 6 per middle section |
| Installation holes | 6 per middle section, 3 per end cap |
Rubber Speed Bump and Hump Comparison:
| | Dimensions
(nominal) | Material | Application | Effect | Yellow strips | Cat-eye nighttime reflectors | Made in the USA |
 Premium 6' Textured Speed Bump
PAB-SP | 2" H
72" L
12" W |  vulcanized rubber
(textured, shiny surface) | Alleys and low speed roadways - holds up in heavy traffic (<20 mph) | Slows traffic to less than 5 mph | 5 (non-wearing, molded-in, synthetic rubber) | 8 (included) | No |
 Standard 6' Speed Bump
SB72N | 2.5" H
72" L
12" W |  crumb rubber from
recycled tires ♲ | Best for parking lots - Can also be used on low speed roadways | Slows traffic the most - 2-5 mph | 3 (molded-in tape) | 8 (optional) | Yes |
 Premium Textured Speed Hump
PAH-SP | 2" H
19" L
35" W |  vulcanized rubber
(textured, shiny surface) | Heavy traffic & low speed roadways | Gentler than speed bumps | 6 (non-wearing, molded-in, synthetic rubber) | None | No |
LOGIN 
Speed Hump Specifications 
Speed Hump Installation Instructions 
