6 Low Profile Rubber Speed Bump
Improve pedestrian safety and reduce the risk of accidents on residential streets, alley ways, driveways, and parking lots. Recycled rubber construction wont chip, crack or crumble under normal conditions. Low Profile (2 High - Nominal) bump slows traffic 1-5 mph, more gently than our Standard Profile (2.5 High) bump.
Features:
- 2 High bump slows traffic 1-5 mph.
- For use in low traffic areas going 10 mph or less.
- Recycled rubber wont chip, crack or crumble.
- Resistant to weather, oil, salt, and moisture.
- Protected from UV light.
- Durable, molded-in reflective yellow tape stripes.
- Flexible rubber conforms to surface contours.
- Dual bottom channels for drainage or to protect wire, hose, or pipe.
- Installs on asphalt or concrete (hardware sold separately).
- Conforms to surface contours.
- Can be cut with a utility knife.
- Weight bearing capacity of 44,000 lbs. per axle.
- Removable for road surface maintenance or snow plowing
- Made in the USA.
Options:
- Available with or without cat eye reflectors. Cat eye reflectors increase visibility at night.
- Optional
End Caps (sold separately, and in a kit).
- Available as a kit including hardware and end caps.
- Hardware sold separately, for either
asphalt or
concrete installation.
- For installations where hardware is not an option, use 10 ounces of epoxy or construction adhesive (i.e. PL Premium Polyurethane).
-
Standard Profile Speed Bump (2.5 H) also available where more aggressive speed slowing is necessary.
Specifications:
Overall dimensions
|
72 L x 12 W x 1- 3/4 H
|
Stripes
|
3 yellow
|
Cat eyes quantity (optional):
|
8
|
Installation holes
|
4
|
Speed bump weight (without end caps)
|
40 lbs.
|
End cap weight
|
3.5 lbs.
|
End cap installation holes
|
2
|
Resources:
Low Profile Speed Bump Specifications
Speed Bump Installation Instructions
Speed Bumps, Speed Humps & Car Stops Flyer
Rubber Speed Bump and Hump Comparison:
|
|
|
|
|
Description
|
Premium 6' Textured Rubber Speed Bump
|
Low Profile Speed Bump
|
Standard 6' Rubber Speed Bump
|
Premium Textured Speed Hump
|
Item Number
|
PAB-SP
|
SB72-2H
|
SB72N
|
PAH-SP
|
Height |
2" |
2" |
2.5" |
2" |
Length x Width (nominal) |
72" L x 12" W |
72" L x 12" W |
72" L x 12" W |
19" L 35" W |
Material |
Vulcanized Rubber (textured, shiny surface). Best in terms of resistance to aging, abrasion, and temperature. |
Molded using crumb rubber from recycled tires ♲ |
Molded using crumb rubber from recycled tires ♲ |
Vulcanized Rubber (textured, shiny surface). Best in terms of resistance to aging, abrasion, and temperature. |
|
|
|
|
|
Application |
Alleys and Low Speed Roadways - Holds up in heavy traffic (<20 mph) |
Alley and Low Speed Roadways |
Best for Parking Lots - Can also be used on Low Speed Roadways |
Heavy traffic & low speed roadways |
Effect |
Slows traffic to less than 5 mph |
Slows traffic 1-5 mph |
Slows traffic the most - 2-5 mph |
Gentler than speed bumps |
Yellow Strips |
5 (non-wearing, molded-in, synthetic rubber) |
3 (molded-in reflective tape) |
3 (molded-in tape) |
6 (non-wearing, molded-in, synthetic rubber) |
Cat Eye Nighttime Reflectors |
8 (included) |
8 (optional) |
8 (optional) |
None |
Speed bump weight (without end caps) |
52 lbs. |
40 lbs. |
52 lbs. |
38 lbs. |
End cap weight |
3.5 lbs. |
3.5 lbs. |
3.5 lbs. |
14 lbs. |
Installation holes (without end caps) |
4 |
4 |
4 |
6 |
Installation holes (endcaps) |
2 |
2 |
2 |
3 |
Installation holes (endcaps) |
2 |
2 |
2 |
3 |
Cut with utility knife |
No |
Yes |
Yes |
No |
Made in the USA |
No |
Yes |
Yes |
No |
More Speed Bumps and Humps