Solar Powered Flashing LED Railroad Crossing Warning Sign 30"
Solar Powered Flashing LED Railroad Crossing Warning Sign - 30"
Alert drivers that there’s a railroad crossing ahead and to be ready to stop with our Illuminated Railroad Crossing warning sign (W10-1). Using innovative LED technology, the system employs a set of eight synchronized high-intensity LEDs. LEDs extend the range of visibility of the sign during the day or night and in all weather conditions. Furthermore, driver awareness of the sign increases because the LEDs are flashing. Sign conforms to the specifications of the Federal Highway Administration (FHWA) set forth in the Manual on Uniform Traffic Control Devices (MUTCD).
Type IX yellow reflective sheeting provides outstanding reflective brightness, day or night.
Visible up to 2 miles away.
High intensity LEDs extend the visibility of the sign under all weather conditions.
Solar panel and battery combination offer 24/7 flash.
Flash rate of 50 to 60 times per minute.
LED life expectancy of over 100,000 hours.
Field-replaceable grommet mounted lights.
Sealed DOT approved lighting.
Patented reflective LED lighting.
Highway grade .080 aluminum construction resists corrosion.
Signs are weatherproof to prevent outside elements from entering the internal casing.
Fast and easy installation, with minimal maintenance. Installs onto any new or existing signpost (not included).
Includes 6 volt battery with up to a 2 to 4-year battery life, but replacement after 18 months is recommended.
MUTCD section 2A.07 compliant.
MUTCD W10-1 regulatory sign.
Made in the USA.
This sign is configured for solar power. (Do not install where sunlight is blocked by trees, buildings, or other structures.) AC power version also available. Call for quote (item number AC-W10-1DM). This option can only be selected at the initial configuration and cannot be changed later in the field.
This option can only be selected at the initial configuration and cannot be changed later in the field.
Dusk to Dawn Sensor:
24/7 Flash is standard. Add a Dawn-to-Dusk Sensor and LEDs will only illuminate between dusk and dawn and not turn on during daylight hours.
This feature can only be added during the initial configuration and cannot be added later in the field. Call for quote (item number DUSKZ).