• Save on this taller flexible bollard post
• 7.35" outside diameter, 72" outside height, .125" bollard cover wall thickness HDPE
• Available in a variety of post and reflective 3M #5100 tape colors.
• 9.5" square Base, 7 Gauge Standard Steel Base Plate
• Post: 1 5/8" Round Galvanized Post.
• Material: HDPE/Steel
Special Pricing Available

• Available in more than a dozen post colors and a variety of reflective tape colors.
• 52" Tall with reflective tape.
• 1 5/8" Post Diameter
• Takes minutes to install

• Same as our 52" Flexible Bollard, with an 8' Signpost. The popular, durable BollardFlex 7”x52” BollardGard bollard cover is attached to a heavy duty spring that flexes 360 degrees with 9lbs. of pressure.
• The bollard unit has a 1 5/8" diameter steel post underneath for more strength and a steel base.
• The base can be anchored to concrete, asphalt or natural ground.

Signs not included!

• Ideally used near schools or where there's pedestrian traffic.
• Made from 100% Recycled rubber.
• Easy, one person installation (instructions included).
• Removable for surface maintenance, snow plows or to relocate at a new site.
• Virgin rubber overlay with molded-in yellow road marking tape stripes.
• Middle piece 35"W x 24"L x 2.25"H, End piece 35"W x 17.5"L x 2.25H

• Durable, thick, recycled rubber.
• Stack 30 lb. and 60 lb. for 90 lb. base.
• Won't chip, crack, or crumble.
• Molded-in Hand-grips make bases easy to pick up.
• Optional wheels make moving signs even easier.
• Made in the U.S.

• Post Protector Base provides high visibility to motorists in parking areas.
• Constructed of durable polyethylene plastic.
• Available in blue, red, or yellow.
• Place over existing post or free standing.
• 22"H x 26"W, Top width 16", Sleeve diameter 4"
• Wall thickness .1875 inches.
• Empty weight 15 pounds, Filled with sand weight 400 lbs.
• Inside volume 28 gallons
• Please allow 3 Weeks for Product Lead Time

• Handicap Parking Sign included with Post & Base.
• 78" Blue Y Tube Post with Black Parking Lot Base.
• 12" x 18" Handicap Parking Sign with Engineer Grade sheeting.

• Designed to cover trenches up to 27”
• Takes the weight of a vehicle up to 4,410 lbs.
• Anti-slip surface
• More Stable & Durable than plywood. 
• Deters metal thieves
• Beveled edge prevents tripping
• Molded from a single piece of fiberglass composite - underside has ribbed framework for added strength
• Must bolt to road surface

Specifications Length - 47.2” Width - 31.5” Weight - 26.5 lbs

• Designed to cover trenches up to 35”
• Takes the weight of a vehicle up to 4,410 lbs.
• Anti-slip surface
• More Stable & Durable than plywood. 
• Deters metal thieves
• Beveled edge prevents tripping
• Molded from a single piece of fiberglass composite - underside has ribbed framework for added strength
• Must bolt to road surface

Specifications Length - 47.2” Width - 31.5” Weight - 26.5 lbs

Ideal for Sidewalk Construction!

• For Pedestrians Only - takes up to 553 lbs.
• Covers trenches up to 27.5”
• Anti-slip surface
• Smooth rubber edge greatly reduces tripping hazard
• Resists sliding, no need to bolt down - flexible material which grips the surface underneath
• Available in yellow
• Length - 44.3”
• Width - 44.3”
• Weight - 62 lbs

• The Flex-Safe Barricade is made of Powder Coated Light Gauge Steel Tubing.
• 7' Long, Weight – 12 lbs.
38”H x 38”W x 7.4” (Open).
• 48”H x 6”W x 8” (Closed).
• NCHRP-350 Crash Tested & Approved (USDOT Safety Standard for Work Zone/Roadside Use).

• The Flex-Safe Barricade is made of Powder Coated Light Gauge Steel Tubing.
• 5' Long, Weight – 12 lbs.
60”H x 36”W x 7” (Open).
• 48”H x 8”W x 5” (Closed).
• NCHRP-350 Crash Tested & Approved (USDOT Safety Standard for Work Zone/Roadside Use).

• Interior and Exterior 40' Column Wrap. 12 in. wide x 1/2 in. thick column bumper wrap for barriers, posts and bollards to protect vehicles from impact and scraping damage.
• Safety yellow stripes integrated into product for a lifetime of high visibility protection.

• Socks are flourescent orange vinyl fabirc
• Available in 10" and 18" throat
• Hardware Sold Separately
• Hardware includes standard frame, nylon ties and fasteners

• Made of Polypropylene. Protect vehicles from costly lot damage, eliminating door dings and bumper rubs.
• Fits base diameter of 24".
• Overall height of 38".
• Weighing 25 lbs.
• No tools necessary to install!
• Choose from colors Yellow, Blue and Black.

• Measuring 12" x 18".
• Engineered Grade Reflectivity.

• Measuring 12" x 18".
• Engineered Grade Reflectivity.

• Measuring 12" x 18".
• Engineered Grade Reflectivity.

• Measuring 12" x 18".
• Engineered Grade Reflectivity.