Park Sentry® Round gives new shape to the Park Sentry lineup. The new round product is designed to fit around virtually any sized round column, from small to extra large. Park Sentry Round is easily wrapped around columns and can be cut for smaller columns or extended for larger ones. The integrated tab and slot system allows the product to be linked together and cut exactly where needed to fit exactly around the column.
Park Sentry round is 34mm (1-1/3") thick and can be installed in single or multiple layers to increase the collision absoption to meet the need. It is available in two standard colors: yellow and black.
Park Sentry round is easily installed by wrapping the flexible panels around the column. Panels are sized to fit by cutting, using the cutting guides spaced ever 1" (26mm) on the face of the panel. Multiple panels are connected using the integrated tab and slot system. The entire installation is secured using adjustable reflective cinch straps installed into the belt recesses on the panel.
Each panel is 34mm (1-1/3") thick, 702mm (27.6") wide, and 1m (39.3") tall. 3 panels wrap exactly around a 610mm (24") diameter round column.
Park Sentry round installation is easy. Just follow the steps:
- 1. Measure the column
- 2. Cut the Park Sentry panels if needed to fit the column. Cut the panel on the slot side to keep the tabs intact.
- 3. Connect panels, if necessary, using the integrated tabs and slots.
- 4. Wrap with the adjustable reflective straps and pull tight against the column. If using the locking cinch buckle, snap the lock shut.