360-Degree Red Solar LED Airport Barricade Light - Case of 10
These long-lasting, solar LED lights are ideal for airport barrier lighting and other applications requiring 360-degree warning lights. They use four special high intensity LEDs to project a 360-degree light pattern. Solar powered and more energy efficient than conventional barricade lights. Comes with standard barricade style base housing, so it is easy to mount on low profile water-filled barriers or other traffic control barricades and devices but can also be installed with any standard 2” pipe thread hole.
Features:
-
Utilizes 6 high-intensity LEDs to project 360° pattern.
-
Ability to change from steady burn or flashing mode with the three-way switch.
-
Output of 4.3 to 7 candela in steady burn mode at center and 10 to 18 candela in flashing mode with 55-75 FPM.
-
Includes two LiFePO4 rechargeable batteries will last for approximately 5 years before requiring replacement. Safer and longer lasting than Lithium batteries.
-
Barricade style base housing included, but also has the screw-on option to use with any standard 2” pipe thread adapter.
-
LED bulbs rated for over 100,000 hours life span
-
Photocell controlled circuit is manually turned on/off by switch recessed inside battery case
-
Made in USA.
Specifications:
|
Base dimensions
|
7" L x 3 3/4" W x 5" H
|
|
Light Type
|
airport barricade
|
|
Batteries
|
LiFePO4 rechargable batteries
|
|
Battery life
|
approximately 5 years
|
|
Lens color
|
red
|
|
Base color
|
yellow
|
|
Weight
|
3 lbs.
|
|
Manufacturer model number
|
630, Part # 98-64005AR
|
Red lens made of polycarbonate with base and housing made from Hi-Impact polypropylene.
Installation & Hardware
- There are 2 options to attach light to barricades:
- Screw on directly into low profile airport barrier.
- Mount as a traditional barricade light to barricades, barriers, traffic cones, traffic drums, and vertical panels using bolt provided.
- Each case of 10 lights includes 10 mounting bolts, 1 socket, and 1 switch pin.
- Thread the mounting bolt through the hole in the base of the light and through a hole in the mountable object.
- Specialized socket is required to tighten mounting bolt.
- Use switch pin to turn light on and off. A heavy-duty paper clip can be substituted for the switch pin
More Barricade Lights
LOGIN 
